Work together.Success together.
Media Center

Responsible for every customer, every product and every solution

Home > Media Center > Industry Trends

8-10 T/h Hammer Mill For Crushing Fruit Shells

Date: 08/05/2020 08:23:09 From: Clicks:

Kindly Reminder: If you are interested in our products, Please get in contact with us

"I would like a machine for crushing husks that is less consumable than before. That capacity is 8-10 Tons/h ,90 kW and 2980r/min. Please send me brochures by email together with a price quote."This is an inquiry from a customer from Bangladesh to Richi Machinery. What the customer needs is a grinder to crush the husk. The crushing output per hour is relatively large. The suitable grinder is recommended to be the SFSP66*80a grinder,90 kW and 2980r/min.

Why Use The Hammer Mill to Crush The Husk

The hammer mill crushes the husk for better granulation. Generally, the husk is relatively hard, has a relatively high calorific value and less ash, and is a good raw material for fuel particles. Common husks include rice husks, peanut husks, coffee husks, sunflower husks, etc., all of which can be used for granulation.

8-10 T/h Hammer Mill

SFSP hammer mill can not only crush grains, but also crush various fruit shells.The basic principle is straightforward. A hammer mill is essentially a steel drum containing a vertical or horizontal rotating shaft or drum on which hammers are mounted. The hammers are free to swing on the ends of the cross, or fixed to the central rotor. The rotor is spun at a high speed inside the drum while material is fed into a feed hopper. The material is impacted by the hammer bars and is

thereby shredded and expelled through screens in the drum of a selected size.

8-10 T/h Hammer Mill For Crushing Fruit Shells
8-10 T/h Hammer Mill For Crushing Fruit Shells

The Process of Hammer Mill

• Material is fed into the mill’s chamber through the feed chute, typically by gravity.

• The material is struck by ganged hammers (generally rectangular pieces of hardened steel) which are attached to a shaft that rotates at high speed inside the mill’s grinding chamber.

• The material is crushed or shattered by a combination of repeated hammer impacts, collisions with the walls of the grinding chamber, and particle on particle impacts.

• Perforated metal screens or bar grates covering the discharge opening of the mill retain coarse material for further grinding, while allowing properly sized materials to pass as finished product.

Hammer Mill Features

1.Advanced teardrop-shaped crushing chamber design, reasonable structure of the secondary crushing, output increase by 25% compared to other models

2.Movable operating door and linkage sieve press structure, more convenient for operation and maintenance.

3.High-precision dynamic balance detecting rotor, little vibration, low noise.

4.Patented ventilating from shaft end system, output of small aperture material increase by more than 25%.

5.Widened grinding surface, fully optimized hammer arrangement, wonderful performance in micro grinding.

6.Using the new-type adjustable sieve pressure plate, adjustable back gauge and tuning technique, to destroy the material circul ation layer.

7.Equipped with safety interlocking device for safety.

8.Forward and reverse work of rotor, longer service life of hammer.

The above is the article for you: 8-10 T/h Hammer Mill For Crushing Fruit Shells. If you are interested in our products or project solutions, please contact us. We will give you the best product quality and the best price. Email:


Here you can submit any questions and we will get back to you as soon as possible. We will not disclose the information you submit to anyone, please rest assured.

Your Name
Your E-mail*
Your Telephone
Product Name
If you need specific information about anything about our product, please write here!

Copyright© 2020 Richi Machinery. All rights reserved.     Site Map