Work together.Success together.
Application

Expert in various Biomass Production Line Solution & Case Application



Home > Application

Home> Application> Production Line

Complete Hemp Pellet Production Line Solution

We set up the Complete Hemp Pellet Production Line Solution that will produce pellets with the world standard technologies!


Raw Material

  • Pre-treatment
    Section

  • Crushing
    Section

  • Conveying
    Section

  • Drying
    Section

  • Pellet Mill

  • Cooling
    Section

  • Screening
    Section

  • Packaging
    Section

  • Dust Control
    System

Finished Product

Pre-treatment : This section is more suitable for the larger raw materials in the early stage, and it is not easy to directly crush or granulate through the crusher. But sometimes this section can be omitted. For example, the sawdust pellet production line can directly pelletize, and this section is not needed.

Crushing Section : This section is usually used in biomass pellet production line, forage gress pellet production line and nutshell straw pellet production line. For example, the SFSP hammer mill is used for wood and fruit shells, and the straw/alfalfa/husk/grass crusher is used for grass and straw. Different raw materials are equipped with different types of crusher.

Conveying Section : Conveying equipment is mechanical equipment that transports bulk cargo and unit goods from a loading point to an unloading point along a certain route in a continuous manner. The conveying equipment of RICHI machinery includes screw conveyor, scraper conveyor, belt conveyor and Bucket elevator.

Drying Section : To dry materials and remove the moisture from 50% to 15-17%. Itincludes: --Burningstove,tosupplyhotair --Drumdryer --Dischargingcyclone.

Pellet Mill: Wood pellet machine, also known as biomass pellet machine, has a wide range of raw materials: straw shells include wood, straw, sawdust, cotton stalks, rice husks, peanut shells, sunflower shells, coconut shells, coffee shells, bamboo, etc. . The grasses are alfalfa, hops, hemp, hay, grass, etc. In addition, there are organic fertilizer granulator, cat litter granulator and so on.

Cooling & Section : Pellets come out from pellet machine, its temperature is around 70℃, by cooling system, It can cool down to room temperature immediately. By momentary cooling, the hardness of pellets will become more stronger.

Screening Section : The forming rate of pellet machine is around 98 % , so there are still have 2% powder in pellets,by screening, sort out all the powders from pellets.

Packaging Section : There are three kinds of automatic packaging machines produced by RICHI machinery: powder packaging machines, granule packaging machines and (universal) dual-purpose packaging machines.

Dust Control System : A dust collection system is an air quality improvement system used in industrial production to improve breathable air quality and safety by removing particulate matter from the air and environment. Dust collection systems work on the basic formula of capture, convey and collect.

Production Line Description

hemp

The hemp pellets produced by the hemp Pellet Mill Production Line have two uses: one can be used as animal feed pellets and the other can be used as pellet fuel. Hemp pellets can be used as feed to feed pigs, cattle, sheep and fish. Hemp as a fuel particle can be used in thermal power plants, boilers, etc.

Fuel pellets for pellet stoves and boilers are today almost exclusively made from wood. However, hemp may start to replace wood as the prominent source of biomass for fuel pellets for domestic pellet stoves and boilers.

Currently, its the wood industry who have really driven the fuel pellet market. Wood pellets produce a much lower ash content compared to grass, hay or straw pellets. Furthermore, grass, hay and straw pellets can create significant issues with corrosion in the pellet stove or boiler. However, hemp fuel pellets have very similar combustion qualities to wood pellets but are made from a much more sustainable raw material.

Hemp Pellet Mill Production Line process

hemp pellet production line flowchart
hemp pellet production line flowchart

The first stage involves collecting the mowed hemp. It is after collecting the materials that one is supposed to lay them in the sun for drying, while laying them in a thin layer after which pilling is done.

The second step is starting the pellet making mill and preheating it for some minutes. This is done to ensure that ones the hemp is put inside the machine, the little left moisture is dried. It is also done to melt the lignin part of the hemp to allow for gluing which makes the resulting pellets to come together.

Thirdly, a container is put under the chute of hemp pellet machine.This container serves as a collecting pit for the resultant pellets.

The fourth step involves adjusting of the moisture content depending on the finished pellets. This process involves accessing the ready pellets where by, if the pellets are crumbly, then the implication is that the pellets are very dry and thus the hemp should be mixed with some water. Mushy pellets thus imply that the pellets have high moisture content and so the hemp has to be dried longer in the sun.

The fifth step is to cool the cool the pellets in the air before storing. This step prepares them for burning and thus one can comfortably use them as fuel.

The last step is generally collecting the unspent pellets and parking them in bags for future use.

Hemp is pressed into pellets by a pellet machine
Hemp is pressed into pellets by a pellet machine

What Are The Issues With Other Biomass Materials?

Before we discuss the benefits of hemp pellets, we need to address the issues other biomass fuel pellets experience during combustion. The pellet fuel market is now developing to include other biomass energy crops such as miscanthus, switchgrass and hemp. All of these biomass materials can be collected and processed in the pellet mill to produce grass pellets which are suitable for fuel-flexible pellet stoves and boilers. However different biomass materials produce different combustion results. We have seen this through our experiments with our own biomass pellet boiler.

The Issue of Ash Content

While miscanthus and switchgrass both have their merits, they also have their issues. The problem with most grasses and straws is during combustion they produce a significantly higher ash content than say premium wood pellets. Many pellet stoves and boilers are designed specifically to burn wood pellets with an ash content below 2%. Therefore using grass pellets can often create issues. With some biomass pellets, the ash content can be as high as 10%. Therefore this either means the ash bin fills up really quickly or in some cases, the pellet stove or boiler can stop working altogether.

Clinker Formations

The other problem with some biomass fuel pellets made from grasses and straws is clinker formations. Clinkers are where the ash melts and forms together into a clump. Most pellet stoves and boilers have no means to deal with clinkers, as they were specifically designed to run on wood pellets. When the clinker is hot it’s soft and sticky. However, when it cools it’s as hard as glass. Luckily our pellet boiler is very durable and able to deal with such clinkers. However, most pellet stoves are not. And a clinker such as that shown in the image above could do a small pellet stove some serious damage.

Why are Hemp Pellets Different?

Well, hemp pellets, unlike other none woody biomass fuel pellets, produce only around 2% ash content. Therefore hemp pellets can be used in a much larger range of pellet stoves and boilers currently on the market today.

Another advantage is that hemp pellets are no more corrosive to burn than wood pellets. This is not the case with fuel pellets made from straw, miscanthus and switchgrass. Finally, hemp pellets do not produce clinker formations as the ash melting temperature of hemp is similar to wood.

So What’s Holding Hemp Pellets Back?

The biggest issue with hemp is the current legal restrictions around its growth. Industrial hemp under many laws today is covered under the umbrella of laws restricting the growth of marijuana. While hemp may look very similar to marijuana it is not the same plant.

The THC content of industrial hemp is so small it’s said you would have to smoke a whole field of hemp to feel any effect. Even where hemp is currently legal there are restrictions on its growth. In the UK you can only grow hemp if there is a suitable processor to take your crop. But this creates the ‘chicken and egg’ scenario. It’s very hard to grow hemp as there are very few legally registered processors. And they are very few hemp processors because they don’t have a ready supply of industrial hemp.

Is All of the Hemp Plant Used To Make Fuel Pellets?

No, hemp fuel pellets are only produced from the shiv. Hemp shiv is the woody core of the hemp plant. First, the outer fibre is separated from the hemp plant and the fibre goes to make clothing and other products. Large hemp shiv particles can be used in construction in combination with lime. What’s leftover are small shiv particles and its these particles that can be processed into hemp pellets.

While wood pellets are currently where the fuel pellet market is focused, hemp pellets could hold significant market share in the future. As the use of industrial hemp scales up, more hemp shiv and shiv dust will be produced. That’s a particular aspect of hemp fuel pellets I find so appealing. The raw material is a byproduct of a byproduct. It means making fuel pellets from hemp is the most efficient/sustainable fuel pellet process there is.

download

SEND INQUIRY

Here you can submit any questions and we will get back to you as soon as possible. We will not disclose the information you submit to anyone, please rest assured.

Your Name
Your E-mail*
Your Telephone
Product Name
If you need specific information about anything about our product, please write here!

Copyright© 2020 Richi Machinery. All rights reserved.     Site Map

0086-13838389622