8 Sets of Mzlh858 Pellet Mills Are Used for 100,000 Tons/year Biomass Pellet Production Line Project

Date: 12/18/2020 08:39:32 From: wood-pellet-plant.com Clicks:

8 Sets of MZLH858 Pellet Mills Are Used in the Construction Project of 100,000 Tons of Biomass Pellet Production Line

The construction project of a biomass pellet production line with an annual output of 100,000 tons. The annual operation days of the project are about 300 days, 10 hours a day, and 8 biomass pellet machine are purchased, with an average of 4 tons per hour. The biomass fuel produced by this project is a solid fuel made by extruding the chaff produced by rice processing in the Lanxi area. It is easy to store, transport, and easy to use, without any harmful additives. It has high combustion efficiency and is clean and environmentally friendly. It can be used for civilian purposes. It can also replace coal as fuel for industrial boilers. After the project is completed and put into production, it will solve the reuse of waste materials such as chaff waste, increase employment, protect the environment, and promote local economic development. It has good economic and social benefits.

1. Project Overview

Table 1-1 List of project composition

Table 1-2 Consumption of main raw and auxiliary materials

Table 1-3 List of main production equipment

Table 1-4 Main products and scale

2. Process Flow Description

• Raw and auxiliary materials entering the factory: The raw and auxiliary materials used by the company are chaff, and the raw and auxiliary materials purchased by the company are all the chaff dried by the rice mill, and the chaff does not need to be dried after being transported into the factory.
• Screening: The raw material chaff is sieved to remove other impurities such as stones in the chaff through a screen.
• Granulation: The sieved chaff is formed in the granulator through the conveyor belt, and heated by the granulator's own equipment. The temperature of the chaff can reach 80℃ to 90℃, and the extruded pellet fuel continues to the die hole The outer end is extruded, and the shaped particles are cut into the required length by the cutter, and finally the shaped particles flow out of the pelletizer and fall into the product conveyor.
• Cooling: The temperature of the pellets is as high as 80-90℃ when the pelletizer is discharged, and must be cooled to room temperature before being put into storage. This project adopts wind cooling. Since the biomass particles have been compressed and dense, there is basically no dust generated during the cooling process. 
• Screening and storage: The cooled biomass pellets are sent to the finished product warehouse by a conveyor. The conveying equipment is equipped with a sliding screen. The particles meeting the required size enter the finished product warehouse, and the non-compliant biomass particles fall into the lower layer of the screen. It is discharged before entering the finished product warehouse and reused in the granulation process. Qualified biomass particles fall into the finished product warehouse, and the bottom of the finished product warehouse is a funnel-shaped discharge port, which is pneumatically discharged. The finished product can be directly dropped into the packaging bag and packaged with a baler before being sold. The formed biomass particles have been compressed and compacted, and there is basically no dust during the bagging process. After the unqualified products are discharged, they return to the forming process.

Biomass Pellet

3. Labor Quota and Work System

The annual operation days of the project are about 300 days, 10 hours a day, and the labor force of the project is 15 people. There is no staff canteen and dormitory in the factory.

The above is the article for you: 8 Sets of Mzlh858 Pellet Mills Are Used for 100,000 Tons/year Biomass Pellet Production Line Project. If you are interested in our products or project solutions, please contact us. We will give you the best product quality and the best price. Email: enquiry@pellet-richi.com